【Smart Construction Edge2.0】 Want to know about recommended flight settings for phantom 4RTK.

Issue
Want to know the recommended flight settings for Phantom 4RTK when generating point clouds with EDGE2.

Answer

Please use the following settings in the dedicated flight software.

Planning = 2D photogrammetry
Ratio = 3:2
Altitude compensation = ON
Gimbal angle = 90 degrees
Shutter priority = OFF
Flight altitude = GSD 1cm to 2cm/37m to higher　
Side Wrap = 70
Overlap = 80

*Please wait about 3 minutes after the P4R is ready to fly before flying.

*PPK processing does not require any RTK supplement or D-RTK fixed station on the P4RTK.